// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/* Interface Imports */
import { IL1StandardBridge } from "../../L1/messaging/IL1StandardBridge.sol";
import { IL1ERC20Bridge } from "../../L1/messaging/IL1ERC20Bridge.sol";
import { IL2ERC20Bridge } from "./IL2ERC20Bridge.sol";

/* Library Imports */
import { ERC165Checker } from "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import { CrossDomainEnabled } from "../../libraries/bridge/CrossDomainEnabled.sol";
import { Lib_PredeployAddresses } from "../../libraries/constants/Lib_PredeployAddresses.sol";

/* Contract Imports */
import { IL2StandardERC20 } from "../../standards/IL2StandardERC20.sol";

/**
 * @title L2StandardBridge
 * @dev The L2 Standard bridge is a contract which works together with the L1 Standard bridge to
 * enable ETH and ERC20 transitions between L1 and L2.
 * This contract acts as a minter for new tokens when it hears about deposits into the L1 Standard
 * bridge.
 * This contract also acts as a burner of the tokens intended for withdrawal, informing the L1
 * bridge to release L1 funds.
 */
contract L2StandardBridge is IL2ERC20Bridge, CrossDomainEnabled {
    /********************************
     * External Contract References *
     ********************************/

    address public l1TokenBridge;

    /***************
     * Constructor *
     ***************/

    /**
     * @param _l2CrossDomainMessenger Cross-domain messenger used by this contract.
     * @param _l1TokenBridge Address of the L1 bridge deployed to the main chain.
     */
    constructor(address _l2CrossDomainMessenger, address _l1TokenBridge)
        CrossDomainEnabled(_l2CrossDomainMessenger)
    {
        l1TokenBridge = _l1TokenBridge;
    }

    /***************
     * Withdrawing *
     ***************/

    /**
     * @inheritdoc IL2ERC20Bridge
     */
    function withdraw(
        address _l2Token,
        uint256 _amount,
        uint32 _l1Gas,
        bytes calldata _data
    ) external virtual {
        _initiateWithdrawal(_l2Token, msg.sender, msg.sender, _amount, _l1Gas, _data);
    }

    /**
     * @inheritdoc IL2ERC20Bridge
     */
    function withdrawTo(
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _l1Gas,
        bytes calldata _data
    ) external virtual {
        _initiateWithdrawal(_l2Token, msg.sender, _to, _amount, _l1Gas, _data);
    }

    /**
     * @dev Performs the logic for withdrawals by burning the token and informing
     *      the L1 token Gateway of the withdrawal.
     * @param _l2Token Address of L2 token where withdrawal is initiated.
     * @param _from Account to pull the withdrawal from on L2.
     * @param _to Account to give the withdrawal to on L1.
     * @param _amount Amount of the token to withdraw.
     * @param _l1Gas Unused, but included for potential forward compatibility considerations.
     * @param _data Optional data to forward to L1. This data is provided
     *        solely as a convenience for external contracts. Aside from enforcing a maximum
     *        length, these contracts provide no guarantees about its content.
     */
    function _initiateWithdrawal(
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _l1Gas,
        bytes calldata _data
    ) internal {
        // When a withdrawal is initiated, we burn the withdrawer's funds to prevent subsequent L2
        // usage
        // slither-disable-next-line reentrancy-events
        IL2StandardERC20(_l2Token).burn(msg.sender, _amount);

        // Construct calldata for l1TokenBridge.finalizeERC20Withdrawal(_to, _amount)
        // slither-disable-next-line reentrancy-events
        address l1Token = IL2StandardERC20(_l2Token).l1Token();
        bytes memory message;

        if (_l2Token == Lib_PredeployAddresses.OVM_ETH) {
            message = abi.encodeWithSelector(
                IL1StandardBridge.finalizeETHWithdrawal.selector,
                _from,
                _to,
                _amount,
                _data
            );
        } else {
            message = abi.encodeWithSelector(
                IL1ERC20Bridge.finalizeERC20Withdrawal.selector,
                l1Token,
                _l2Token,
                _from,
                _to,
                _amount,
                _data
            );
        }

        // Send message up to L1 bridge
        // slither-disable-next-line reentrancy-events
        sendCrossDomainMessage(l1TokenBridge, _l1Gas, message);

        // slither-disable-next-line reentrancy-events
        emit WithdrawalInitiated(l1Token, _l2Token, msg.sender, _to, _amount, _data);
    }

    /************************************
     * Cross-chain Function: Depositing *
     ************************************/

    /**
     * @inheritdoc IL2ERC20Bridge
     */
    function finalizeDeposit(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external virtual onlyFromCrossDomainAccount(l1TokenBridge) {
        // Check the target token is compliant and
        // verify the deposited token on L1 matches the L2 deposited token representation here
        if (
            // slither-disable-next-line reentrancy-events
            ERC165Checker.supportsInterface(_l2Token, 0x1d1d8b63) &&
            _l1Token == IL2StandardERC20(_l2Token).l1Token()
        ) {
            // When a deposit is finalized, we credit the account on L2 with the same amount of
            // tokens.
            // slither-disable-next-line reentrancy-events
            IL2StandardERC20(_l2Token).mint(_to, _amount);
            // slither-disable-next-line reentrancy-events
            emit DepositFinalized(_l1Token, _l2Token, _from, _to, _amount, _data);
        } else {
            // Either the L2 token which is being deposited-into disagrees about the correct address
            // of its L1 token, or does not support the correct interface.
            // This should only happen if there is a  malicious L2 token, or if a user somehow
            // specified the wrong L2 token address to deposit into.
            // In either case, we stop the process here and construct a withdrawal
            // message so that users can get their funds out in some cases.
            // There is no way to prevent malicious token contracts altogether, but this does limit
            // user error and mitigate some forms of malicious contract behavior.
            bytes memory message = abi.encodeWithSelector(
                IL1ERC20Bridge.finalizeERC20Withdrawal.selector,
                _l1Token,
                _l2Token,
                _to, // switched the _to and _from here to bounce back the deposit to the sender
                _from,
                _amount,
                _data
            );

            // Send message up to L1 bridge
            // slither-disable-next-line reentrancy-events
            sendCrossDomainMessage(l1TokenBridge, 0, message);
            // slither-disable-next-line reentrancy-events
            emit DepositFailed(_l1Token, _l2Token, _from, _to, _amount, _data);
        }
    }
}